OEM MODULE with On Board dual din rail mounting option; 8 CHANNEL VOLTAGE DIVIDER (8VDX-DS25) with individual return line and L.P.F. (Low Past Filter) option industrial transducer Board.

This board offers a simple, state-of-the-art, reliable way to convert (attenuate) eight large input voltage individual signals to a low level voltages value. i.e 0 to 24V into 0 to 3V.

The MODULE EIGHT CHANNEL VOLTAGE DIVIDER 8VDX-DS25, voltage to lower voltage converter, is a signal voltages or altering voltages (AC) to a lower signals value, both for AC and DC.

Shown above in 0 to 10V to 0 to 5.0V voltage dividers configuration with 1/2W 1% resistors.

Ideal for PLC with 0 to 5V inputs with individual return line

(5-32 or 6-32 PAN Head screws and stand-off are optional)

Shown above in 0 to 10V to 0 to 5.0V voltage dividers configuration with 1/4W 1% resistors

(4-40 PAN Head screws and mounted Black DIN RAIL CLIPS are optional)

The MODULE 8 VOLTAGES DIVIDER 8VDX-DS25, board is designed to perform 8 voltage to lower voltage value conversion. If used properly, it will eliminate the need for an expensive board, which would otherwise be needed to carry out the same tasks.

The MODULE 8 VOLTAGE DIVIDER 8VDX-DS25  is easy to install, setup, and operate. If you want to do professional scientific voltage measurement related functions, The MODULE 8 VOLTAGE DIVIDER 8VDX-DS25 offers the features you need. It can be mounted easily via four 0.125" mounting holes using 4-40 screws or two DIN-RAIL-MOUNTING-CLIPS, four 0.155" mounting holes using 5-32 or 6-32 screws,

Simply connect the board input to incoming voltage signals source i.e 0 to 10VDC and our board will convert it to an outputs equal to inputs signal divided by a factor X.

Precision 8 channel Voltage Divider with individual return lines

1. D-SUB25 (Male) Inputs:

                                           Vin1 to Vin 8, Pins 1, 3, 5, 7, 9, 11, 13, 15

                                           COM 1 to COM 8, Pins 2, 4, 6, 8, 10, 12, 14, 16

2. D-SUB25 (Female) Outputs:

                                          Vin1 to Vin 8, Pins 1, 3, 5, 7, 9, 11, 13, 15

                                          COM 1 to COM 8, Pins 2, 4, 6, 8, 10, 12, 14, 16

3. Chassis Ground (option)

Voltage divider industrial standard configuration models (1/4W resistors):

Mounting Option

Simply snap the Din-Rail mounted enclosure into your NEMA 4 box (enclosure) for watertight applications

Shown above voltage dividers 8 channel configuration mounted on 4 standoff

(5-32 or 6-32 PAN Head screws and standoff are optional)

Shown above voltage dividers 8 channel configuration mounted on two DIN-RAIL CLIPS

(4-40 PAN Head screws and mounted Black DIN RAIL CLIPS are optional)

Specifications

• Max power consumption              0.5W

• Storage temperature                  40 - 70   [F]

• Operating temperature                32 - 140 [F] (0 to 60°C) @ 95% RH

• Mounting                                  Four 0.128” (about 3.1mm) holes, or four 5/32 (0.15625”)  holes, Center to Center (C-C) 2.975" * 1.550"

• Board dimensions                       3.275" & 1.850"

• Manufactured                           100% in USA

Pricing 

* Prices, SKU#, P# and colors are subject to change without notice. 

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-10X0 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 10

EID-CONVER-TER-8VDX-DS25-10X0-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-08X0 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 8

EID-CONVER-TER-8VDX-DS25-08X0-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-07X2 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 7.2

EID-CONVER-TER-8VDX-DS25-07X2-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-06X0 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 6

EID-CONVER-TER-8VDX-DS25-06X0-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-05X0 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 5

EID-CONVER-TER-8VDX-DS25-05X0-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-04X0 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 4

EID-CONVER-TER-8VDX-DS25-04X0-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-03X3 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 3.3

EID-CONVER-TER-8VDX-DS25-03X3-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-03X0 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 3

EID-CONVER-TER-8VDX-DS25-03X0-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-02X5 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 2.5

EID-CONVER-TER-8VDX-DS25-02X5-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-02X5 voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 2

EID-CONVER-TER-8VDX-DS25-02X0-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-01X6 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 1.6

EID-CONVER-TER-8VDX-DS25-01X6-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-01X5 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 1.5

EID-CONVER-TER-8VDX-DS25-01X5-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-01X2 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/4W resistors, Division factor 1.2

EID-CONVER-TER-8VDX-DS25-01X2-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-10X0 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 10

EID-CONVER-TER-8VDX-DS25-10X0-X50

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-08X0 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 8

EID-CONVER-TER-8VDX-DS25-08X0-X50

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-07X2 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 7.2

EID-CONVER-TER-8VDX-DS25-07X2-X50

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-06X0 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 6

EID-CONVER-TER-8VDX-DS25-06X0-X50

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-05X0 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 5

EID-CONVER-TER-8VDX-DS25-05X0-X50

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-04X0 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 4

EID-CONVER-TER-8VDX-DS25-04X0-X50

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-03X3 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 3.3

EID-CONVER-TER-8VDX-DS25-03X3-X50

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-03X0 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 3

EID-CONVER-TER-8VDX-DS25-03X0-X50

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-02X5 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 2.5

EID-CONVER-TER-8VDX-DS25-02X5-X50

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-02X5 voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 2

EID-CONVER-TER-8VDX-DS25-02X0-X50

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-01X6 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 1.6

EID-CONVER-TER-8VDX-DS25-01X6-X50

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-01X5 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 1.5

EID-CONVER-TER-8VDX-DS25-01X5-X25

call

VOLTAGE-DIVIDER-8VDX-DS25 Model 8VDX-DS25-01X2 individual return line 8 Channel voltage divider with LPF with D-SUB-25 Male and D-SUB-25 Female, with 1% 1/2W resistors, Division factor 1.2

EID-CONVER-TER-8VDX-DS25-01X2-X50

call

  ^•